Plow Cutting Edge - Razor® XL by Winter Equipment

Razor® XL Carbide Cutting Edge System

(10 customer reviews)

DOT-Rated carbide cutting edge snow plow blade proven to last 3X longer than your typical carbide blades. Your satisfaction is guaranteed.


Lasts 3x longer than standard ¾” x 6″ carbide blades w/ steel cover. 100% Satisfaction Guaranteed.

Increased Blade Life – System includes bullnose HammerHead™ carbide inserts and Impervium® Carbide – filled wear bars.

Superior Cutting – Aggressive blade cuts through hardpack and ice, leaving your roads clear and minimizes your salt usage and chemical treatment.

High Wear Protection – Two PlowGuard MAXX™ guards to defend against premature and uneven wear.

Best Used For

  • Roads: Concrete, chip-seal, asphalt
  • Speed: High
  • Plow Type: Front reversible, one-way, wing and tow plows
  • Angle of Attack: 65° – 90°

Materials Used

  • Bullnose Hammerhead Inserts: Radius carbide tip offers 30% more carbide than standard trapezoid design, attacking at multiple angles.
  • Heat-Treated Steel Cover: Integrated cover protects carbide from impact and is welded on for easy installation.
  • Hardfaced Shoes: Increases wear life by welding PlowGuards along the back of the blade.
  • An engineered a 5/8″ bolt with the strength of a ¾” bolt, increasing overall tensile strength thus reducing potential shearing due to the square extended neck of the bolt design. Patent Pending

System Includes

  • Three interlocking Razor® XL cutting edge blade sections including pre-welded wear bars and abrasion resistant cover
  • Two PlowGuard MAXX™ with Impervium® Carbide
  • Grade 8 Hardware

10 reviews for Razor® XL Carbide Cutting Edge System

  1. Lake County

    Cost savings makes sense. The razor blades are lasting forever and wearing great. I purchases them 3 years ago and think I’ll get another 2 if not more out of them.

  2. Dave G.

    Love the systems and guards! They hold up very well for us even though we don’t plow often.

  3. William L

    We just ordered more systems with you. They are working out very well for our applications. You guards help us extend the life of our blades too.

  4. Rick – Supervisor

    Lasting 4x longer than carbide and cover, recently reordered 53.

  5. D Hinton

    We used to change our carbide and cover every 24 hours. Our Razor XL has lasted 5-6 times as long as our old carbide and cover cutting edges.

  6. Bob – WV DOH

    Outlasted other carbide/guard by 5 times! Claim 6x longer than carbide, cover, and Winter guards. Also run Joma & Sno-Shock.
    Outlasted current carbide and guard set up by at least 5X.

  7. Idaho Jason

    Running Razor xl for 3 years and still running strong.

  8. EB

    Great system! using the razor on the wing blade great sytem 80% of our trucks have them on them.

  9. Will Yaple

    The only blade to run. I am running the winter blades on all my trucks i haven’t changed blades for a few years and that is the best thing.

  10. John Ball

    3 to 1 over standard carbide insert plow bits. We decided to try the Razor XL System on a couple of Trucks last winter and had good results. After discussing it this fall we decided to expand our test to four Trucks an we are running those trucks side by side in the same locations with like trucks on the same section of roads. So far the results both last year and so far this year are showing that the Razor XL’s are lasting 3 to 1 over our carbide insert plow bits that we have used for years. If this continues it will be a significant savings in our yearly plow bit budget.

Add a review

Your email address will not be published. Required fields are marked *

Cant find your plow?
Not sure what you have?
Talk to our product experts: 888-294-9485
  • Western
  • Fisher
  • SnowEx
  • SnowDogg
  • BOSS