Razor® Carbide Cutting Edge System

The Perfect Carbide & Cover Plow Blade Setup, Right Out of the Box

Are you tired of premature blade failures and the headache of figuring out the right carbide and cover snow plow blade setup? The Razor® All-In-One Carbide & Cover Cutting Edge System eliminates these frustrations with an integrated solution that lets you focus on what matters—efficiently clearing roadways and serving your community.

Your Challenges on the Road

Maintaining roads during winter is challenging enough without worrying about your equipment. Standard carbide and cover setups require precise attention to detail during ordering and installation. When not configured correctly, these expensive systems fail prematurely, wasting your time, materials, and budget.

The Razor® Solution

The Razor® features a carbide insert blade with an integrated AR500 steel cover blade welded in the perfect position—eliminating guesswork and providing reliable performance every time.

Why Choose Razor® Over Standard Plow Blade Systems?

WITHOUT RAZOR®:

• You spend valuable time figuring out the right blade heights and bolt-hole gauges
• Debris builds up between separate blades, leading to premature bolt failures
• Improperly aligned cover blades waste material or leave carbide inserts exposed
• Heavy, full-length plow blades require multiple staff for installation, risking injuries
• Uneven wear and washout at the plow ends shortens blade life

WITH RAZOR®:

• Perfect plow blade alignment right out of the box—no guesswork or special knowledge needed
• Welded construction eliminates debris buildup and reduces bolt failures
• Wear indicators show when maintenance is needed before moldboard damage occurs
• Manageable 3’ to 4’ sections make installation safer and more efficient
• Included pair of PlowGuard Straight, PlowGuard CurbRunner®, or PlowGuard CurbCast guard ensure even wear across the entire plow

Key Carbide & Cover Features

• 25° 5/8″ Trapezoid Carbide Inserts matched to the most efficient plowing angle
• Integrated AR500 Steel Cover Blade perfectly positioned to protect carbide from washout and impact
• Welded-On Cover Blade eliminates debris buildup between blades that causes breaking and bolt failure
• Carbide Wear Indicators show when you’ve used all your carbide
• Moldboard Damage Wear Indicators alert you before damage occurs
• 3-4 ft Blade Segments for easier, safer installation with less staff
• Interlocking Tabs enhance rigidity across the plow
• Includes a pair of PlowGuard Straight, PlowGuard CurbRunner, or PlowGuard CurbCast plow guards to prevent washout and ensure even wear

Snow Plow Benefits That Matter to You

• Lasts 2X Longer than standard carbide & cover snow plow blades, reducing your downtime and inventory needs
• Perfect Alignment Every Time means no more frustration with tiny details during ordering and installation
• Reduced Bolt Failures thanks to the welded construction that prevents debris buildup
• Even Wear Across the Plow keeps you operating efficiently throughout the season
• Easier, Safer Blade Installation with manageable segments instead of dangerous full-length edges

Best Used For

• Roads: Concrete, chip-seal, and asphalt roads
• Speed: Low, medium, and high-speed plowing
• Plow Types: Front reversible, one-way, wing, and tow plows
• Angle of Attack: 60° – 90°

The Industry’s Only Satisfaction Guarantee

We offer the industry’s only satisfaction guarantee. If you experience any problems, we’ll work with you until you’re satisfied.

Your Clear Path Forward

1. REQUEST A QUOTE TODAY
   Contact us online or call 1-877-294-0228 with your specific needs.
2. GET YOUR BEST PRICING GUARANTEED
   We’ll find your best contract pricing (including NASPO & local Co-Ops).
3. FOCUS ON WHAT MATTERS
   Get back to efficiently serving your community with reliable equipment.

Don’t waste another plowing season with blade failures and frustrating setups.

Experience the confidence of knowing your cutting edges will perform reliably when your community needs you most.

The Razor® Carbide Snow Plow Cutting Edge System Includes

• Three interlocking RAZOR® cutting edge blade sections
• A pair of guards – PlowGuard Straight, PlowGuard CurbRunner, or PlowGuard CurbCast
• All Grade 8 Hardware needed for installation

Common Questions

“Why do I need a cover blade with my carbide snow plow cutting edge?”

Yes, carbide inserts are extremely hard for long wear life, but this hardness makes them fragile. When carbide inserts are exposed to road obstacles, they can shatter or fall out, leaving you with only a soft mild steel blade. A properly positioned cover blade protects these inserts from impacts and extends the life of your system.

“What makes the alignment of carbide and cover blades so critical?”

If your snow plow’s cover blade hangs too far below the carbide blade, you waste material before it wears into the carbide. If it sits above the carbide blade, you leave the carbide inserts exposed to impacts and washout. The Razor’s welded construction guarantees the perfect 1/4″-1/2″ alignment every time.

“Why do bolt failures happen with standard carbide and cover setups?”

Standard plow cutting edge setups create spaces between the blades and moldboard where debris can build up. When debris fills these gaps, it places shear forces on the bolts rather than tensile forces. Boltsare strong under tension but weak under shear, leading to breakage. The Razor’s welded construction eliminates these gaps and dramatically reduces bolt failures.

“How does the Razor® system reduce snow plow blade installation time and injury rates?”

Traditional full-length carbide and cover snow plow blades can be up to 12 feet long. They are heavy and cumbersome, requiring multiple workers to install. The Razor® comes in 3-4 foot interlocking blade segments that can be managed by fewer staff members, reducing strain and injury risk while speeding up installation.

“What are snow plow blade wear indicators and why are they important?”

The Razor’s built-in wear indicators tell you when you’ve used all your carbide and when to replace the cutting edge before damage occurs to your plow’s moldboard. This feature helps you maximize blade life while protecting your equipment from costly repairs.

“What makes the AR500 steel cover blade better than high-carbon steel?”

While high-carbon steel is wear-resistant, it’s more likely to break upon impact. The AR500 steel in the Razor® provides excellent abrasion resistance while handling impacts better, preventing breakage during operation.

“What is included with the Razor® snow plow blade system?”

The complete plow blade system includes three interlocking Razor® cutting edge blade sections, two PlowGuard Straight, PlowGuard CurbRunner®, or PlowGuard CurbCast plow guards, and all the grade 8 hardware needed for installation.