Description
Lasts 4x longer than standard ¾” x 6″ carbide blades w/ steel cover. 100% Satisfaction Guaranteed.
Increased Blade Life – System includes bullnose HammerHead® carbide inserts and Impervium® Carbide – filled moldboard shoes.
Road Friendly – The wide blade footprint helps to minimize road damage.
High Wear Protection – Two PlowGuard MAXX™ guards to defend against uneven and premature wear, where you need it most.
Best Used For
- Roads: Concrete, chip-seal, asphalt
- Speed: High, Medium, Low
- Plow Type: Front reversible, one-way, wing and tow plows
- Angle of Attack: 45° – 90°
Materials Used
- Bullnose HammerHead Carbide Inserts: Radius carbide tip offers 30% more carbide than standard trapezoid design, attacking at multiple angles.
- Heat-Treated Steel Cover: Integrated cover protects carbide from impact and is welded on for easy installation.
- Hardfaced Shoes: Integrated moldboard shoes with Impervium® Carbide for improved wear life.
- An engineered a 5/8″ bolt with the strength of a ¾” bolt, increasing overall tensile strength thus reducing potential shearing due to the square extended neck of the bolt design. Patent Pending
System Includes
- Three interlocking cutting edge blade sections with pre-welded shoes and abrasion resistant cover plates
- Two PlowGuard MAXX™ guards with Impervium® Carbide
- Grade 8 Hardware
Lasts 4x longer than standard ¾” x 6″ carbide blades w/ steel cover. 100% Satisfaction Guaranteed.
Increased Blade Life – System includes bullnose HammerHead® carbide inserts and Impervium® Carbide – filled moldboard shoes.
Road Friendly – The wide blade footprint helps to minimize road damage.
High Wear Protection – Two PlowGuard MAXX™ guards to defend against uneven and premature wear, where you need it most.
Best Used For
- Roads: Concrete, chip-seal, asphalt
- Speed: High, Medium, Low
- Plow Type: Front reversible, one-way, wing and tow plows
- Angle of Attack: 45° – 90°
Materials Used
- Bullnose HammerHead Carbide Inserts: Radius carbide tip offers 30% more carbide than standard trapezoid design, attacking at multiple angles.
- Heat-Treated Steel Cover: Integrated cover protects carbide from impact and is welded on for easy installation.
- Hardfaced Shoes: Integrated moldboard shoes with Impervium® Carbide for improved wear life.
- An engineered a 5/8″ bolt with the strength of a ¾” bolt, increasing overall tensile strength thus reducing potential shearing due to the square extended neck of the bolt design. Patent Pending
System Includes
- Three interlocking cutting edge blade sections with pre-welded shoes and abrasion resistant cover plates
- Two PlowGuard MAXX™ guards with Impervium® Carbide
- Grade 8 Hardware
Jeff –
On my 2nd year of the same blades. Can confirm these blades are far superior over conventional carbide blades. Highly recommend
Greg –
This system is great, we are 1.5 years in and it still has life left.