|
Winter® Xtendor™
 The Xtendor features both
a dual carbide matrix weld on the wrap-around corner and bottom
of the blade. They are designed for use on pickup trucks with
plows like Meyer, Western and Fisher. The Xtendors are prepunched
to fit most standard plows.
Important: The Xtendor should mount flush with bottom of blade.
DO NOT extend it below the bottom of the blade. This reduces
wear life. Wrap-around should fit tight to the end of the blade.
Are provided in a kit with a left and right Xtendor |
 |
One Xtendor installed
on the left or right side of the blade |
 |
Two Xtendors installed
on the left and right side of the blade |
 |
Important: The Xtendor
should fit tight to the end of the blade |
 |
|
|
